November 18

How to Find Out Why Your Basement is Flooding

 

When you’re trying to find out why you’re experiencing water in your basement, there are certain signs to look out for. These include the following.

Drain-tiles not functioning

Having your drain-tiles not working when basement is flooding can be a major problem. This problem can cause water to seep through your foundation, which is what you want to avoid. If this is the case, you need to do some repair work.

A good drainage system should be installed by a professional. It should be done during the build phase, which keeps the cost down. The cost will vary depending on the type of drain-tile used, the size of the pipe, and whether the house has been retrofitted.

If the drain tile is clogged, it can cause water to pool on the floor and against the foundation. This can lead to mold and black mold. It can also cause interior water channeling problems.

If you have a sump pump installed, you should check it after heavy rain. If it sounds loud, this may mean that it needs to be replaced. You can also install a check valve on the outside of your house to prevent basement flooding.

Leaky basement pipes

Fortunately, there are a variety of ways to fix leaky basement pipes. In fact, repairing a leaky pipe can be an easy, do-it-yourself task.

One of the simplest ways to prevent a water leak is to prepare your pipes for the cold weather. Installing pipe putty is a great way to prevent water seepage. It also helps keep your basement dry.

Another thing to keep in mind is that leaky pipes can cause mold. Leaky pipes also require regular inspections. You can also use a leak detection machine to determine where the leak is. These machines use acoustic sensors to detect vibrations caused by leaks.

Another way to prevent water seepage is to add a sump pump. This will remove large puddles of water. Alternatively, you can use a wet vacuum to clean up the puddle.

Another important step in keeping your basement dry is to inspect your gutters for blockages. Leaving blockages can lead to rain water collecting near your foundation.

Sump pump not working

Despite the fact that sump pumps are an important part of basement flooding protection, they can still fail. The first thing you need to do is to check your system to see if it is working. If it is, you will need to take action to resolve the issue. You may need to hire an expert to help you fix the problem.

The most common cause of a sump pump failure is a power outage. This can be caused by many things, but the most common is a broken or faulty battery. If you have a battery backup, you should check it every month or two to ensure that it is working properly.

Another common reason for a sump pump to fail is a clogged discharge line. A clogged discharge line can cause flood water to return to the basement. If this is the case, you should consider installing a specialty discharge line. This will help prevent debris from building up in the discharge line.

Signs of flooding in your basement

Regardless of whether you are a homeowner or a renter, you should always watch out for signs of flooding in your basement. This can lead to damage to your belongings, weakened wood structures, and structural failure. It can also leave your basement prone to mold growth.

The most obvious signs of flooding are standing water and discolored stains. These are the result of water that seeps through the foundation or the walls of your basement. If you notice these, move immediately to prevent mold growth.

Water damage in the basement can also cause rotting joists, columns, and headers. Rot will lead to structural failure and can also ruin the flooring. It can also lead to mold growth, which is a very serious health issue.

Other signs of flooding include cracks in your walls and floors. Cracks will allow water to enter your basement and can cause permanent damage. Small cracks will usually grow over time.

If you notice cracks, you should contact a local contractor to repair them. They can also use waterproof sealants to repair cracked surfaces.

For 5-Star plumber services, get PVD Plumbing & Repipe on the job! Call us at (562) 708-2956 or use our contact form.

Frequently Asked Questions

How can you clear a clog between your toilet and the sewer?

Check the drain to make sure there are no foreign objects. You may need to use a snake to remove them. If that doesn’t work, then you might try a plunger. This will push everything back into its place. If none of these work, call a professional plumber.

 

What is causing your drains to clog?

Hair, food waste and soap scum could all cause blockages in drains.

You can prevent them from happening again by understanding the causes.

Grease buildup can be the cause of a blockage in your drain. Grease build-up can occur when oils and fats from cooking utensils are not properly cleaned. This can cause an unpleasant odor that attracts insects and flies.

Grease also makes its way into the drainage system through kitchen sinks and washing machines, where it mixes with water and soap and collects at the bottom of the sink/drain.

Use “Drain Away” to get rid of any strange smells. This product contains enzymes that help dissolve fat deposits.

Keep your drains clean, especially after they have been unused. Scrape away any dirt or grime with a putty knife or stiff wire brush.

You can also add two cups of white vinegar to your bathtub and run the tub full blast for about 15 minutes. After draining the water, let it dry for 24 hours. This will help to dissolve various types of grease.

Another reason why your drains may start to clog is because of plumbing problems like worn-out pipes or broken pipe joints. For immediate assistance, contact a plumber.

Lack of maintenance is another reason drains can become clogged. When was the most recent time you cleaned your drains. Do they still need to be cleaned? Do you know how to clean them properly?

Check your drain every six month for signs of damage and wear. If you spot any damage, be sure to take a note of the exact location and immediately call a professional plumber.

 

How do I know if my main line is clogged

Check the main line for any blockages with a waterhose. If bubbles appear from the faucet, it is likely that the main line has become blocked.

You can use a flashlight to shine light through the pipe if you don’t own a water hose. You should call a plumber if you notice any movement in the pipe.

 

What is best to unclog toilets?

Baking soda is the best liquid for unblocking your toilet. Baking soda will dissolve any clogs such as soap scum or hair, grease, rust, or other stains. By neutralizing odors, it helps prevent future clogs. Baking soda is an effective alternative to harsh chemicals in most commercial drain cleaners.

Baking soda comes as many different types. It can be bought in powder form which you need to mix with hot water. Or, you can purchase it in pellets, which are easier to store. You should thoroughly rinse pellets before putting them in a sink.

You can use baking soda by pouring it down the drain and letting it sit for 20 minute. Run a plunger to unblock the blockage. You can continue this process until you have cleared the blockage.

 

Can bleach be used to unclog a toilet

Bleach does no harm to toilets. It cleans them. If you’re concerned about blocked drains, try baking soda (sodium carbamate). Baking soda can dissolve solid material and help clear blockages. To dissolve hardened deposits you can also add vinegar. These methods should not ever be used around sinks or tubs. These chemicals can cause permanent damage to fixtures and surfaces.

 

How can you unclog the toilet when the water is too high?

If you have a spare plunger, keep it. A plastic bag can be used in its place. This might not work well for everyone but it will prevent more damage. Be sure to cover the bowl with the bag before flushing.

 

Why is my toilet water not going down?

This is a common problem for those who have an old-fashioned, unattached toilet bowl. The reason why this happens is that the flush valve isn’t working properly. It could also be due to a damaged flapper in the tank’s bottom. This can be fixed by replacing the flapper assembly. To do so, you will need to remove the tank’s lid. The flapper assembly should now be exposed. The flapper assembly will be removed by unscrewing the screws. Next, loosening the nut that holds the flapper assembly to its housing will be necessary. Once you have removed the nut, make sure that all parts are dry and clean. Then, return the parts to their original place. To ensure your toilet works again, it is essential that you correctly position the flapper.

 

Statistics

  • Toilet use accounts for 25 to 30 percent of household water use. (epa.gov)
  • My material cost is between 25-30 percent of the cost of the job.” (rd.com)
  • For about 90 percent of clogged toilets, you only need one special tool — a toilet plunger. (familyhandyman.com)
  • Use an Efficient ToiletRoughly 25 to 30 percent of all water use in a typical household is accounted for by the toilet. (mrrooter.com)
  • the ENERGY STAR label uses 35 percent less energy and 50 percent less water than standard models. (epa.gov)

External Links

thespruce.com

 

homedepot.com

 

energystar.gov

 

epa.gov

 

 

How To

5 Tips to Cleanclog Your Toilet Without Using a Plunger

How do I unclog my bathroom without using a plunger or a plunger

If you’re stuck in a situation where your toilet is clogged up, there’s no way you can use a plunger to fix this issue. There are some ways to fix a clogged toilet without a plunger. These are five easy ways to unclog your toilet without using a plunger.

  1. Baking soda (sodium bicarbonate), – Baking soda has an alkaline substance called Carbon dioxide that helps to break down the pipe buildup. Just pour 1 cup baking soda into the toilet bowl. Flush it several times until water runs clear.
  2. Vinegar – Vinegar, which is acidic, will dissolve any buildup in your pipe. To flush your toilet, pour 1/4 cup of white Vinegar into your bowl. Let it sit for about 24 hours. After 12 hours, you should start to see the results.
  3. Warm water should be run down the drain. This is a great way to dissolve any blockage within your pipes. Turn off the faucet. Now run cold tap water through your sink. Wait for 15 minutes before turning the faucet back on.
  4. You must remove the lid. The lid is essential in keeping your toilet clean. Make sure to remove it whenever you’re not using the bathroom otherwise, it can get gross.
  5. Examine your toilet for hair. Is there any hair floating around? Your toilet may not be draining properly if there is hair.

Did you miss our previous article…
https://pvdplumbing.com/plumbing-tips/how-to-solder-copper-pipe


You may also like

Gassy Smell in House

Gassy Smell in House
{"email":"Email address invalid","url":"Website address invalid","required":"Required field missing"}

Simply call or click to get started

For the fastest response

Use this form anytime...